pipeline gate valve

...Pipeline Valves Gate Valve Product Description Basic design specification API 600 Pressure-temperature rating ASME B16-34 Structure length ASME B16-10 Flange type and size ASME B16-5 Butt weld end ASME B16-25 Inspection and test API 598 Feature Structural style Natural Gas Pipeline Gate valve adopts OSY and BB(bolted bonnet), Rotate-Rising stem and non-rise hand wheel which is international current gate valve

...gate valve is a valve with handwheel designed to DIN3352 and EN558-1 standards. It is available in both cast iron and ductile iron, with a PN10/PN16 pressure rating and a DIN3202-F5/EN558-15 face to face. The F5 gate valve comes with a flanged end connection. This F5 gate valve...

... temperature: ≤80 ℃ Applicable medium: water, steam, oil Body material: Cast Iron Connection: welding Welding connection valve for the nominal pressure PN16.0-32.0Mpa and working temperature is equal to or less

...ng the centerline of the passage. Gate valves are mainly used for cutting off in pipelines. Gate valve is a widely used type of valve. Gate valves can only be used for fully open and fully closed blocking in pipelines, and cannot be used for adjustment or

...gate valve is a gate valve with flange connection, which is the most common connection method. Flanged gate valves are stable and reliable when used in pipelines, so flanged gate valves are often used in high-pressure pipelines. Name Flange Gate Valve Model No. Z41H Size 1/2"---24" Connection Form Butt Welded Channel Straight Through Type Seal Surface Wedge Gate Valve Thread Position of Valve Rod Outside Gate Valve...

...Gate Valves For Industrial Chemical Industry Gate Valve Overview Cast iron gate valve is a type of valve used to completely open or close the flow of a medium, like water. It is mainly designed for starting or stopping flow, not for flow adjustment. There are two types of cast iron gate valves: wedge gate valves and parallel gate valves. These valves are commonly used in water pipelines. Gate Valve...

... for opening and closing is small, so it is easy to open and close. 3.The medium flowing direction is not restricted, and it doesn't disturb flowing and reduce the pressure of pipeline. 4. Short length structure 5.

...sealed by means of parallel-type Metal to Metal Sealing, The effection of sealing is good,It is convenient to open, The two ends of the valve and pipes are joined and staled with spherical movement,The movable connection of the rubber seal ring like "O"

...Gate Valves With Flanged Ends Gate Valve Features Gate Valves aredesigned for fully open or fully closed service. They are installed in pipelines as isolating valves, and should not be used as control or regulating valves. Operation of a gate valve is performed doing an either clockwise to close or clockwise to open rotating motion of the stem. When operating the valve stem,the gate...

... or wastewater pipelines. The valve body of the square guillotine valve is normally fabricated and could be tailormade to various sizes. On the other hand, the design of square guillotine valve is based on low pipeline pressure. It is not recommended to

...full open and full close to block fluid in the pipeline. The gate is usually wedge shaped. When the valve is wide open, the gate is fully drawn up into the valve, leaving an opening for flow through the valve the same size as the pipe in which the valve is

...Gate Valve 1. PRODUCT PROFILE Rubber seated gate valves, in ductile iron GGG40 or GGG50 with flat body and EPDM covered wedge, are suitable for drinking water applications, being coated with epoxy powder painting, not toxic.Gate valve is suitable for a wide range of pressure, temperature and diameter, especially for medium and large diameter pipeline...

... in pipeline. single disc flat gate valve It adopts two kinds of structures, they are single-disc guiding hole and non-guiding hole. The channel will be more smooth with guiding hole. It is suitable for ...

...Thread connection BSP, NPT Working pressure 20 Bar MOQ: 100pcs Warranty: 2 Years What is Gate Valve A gate valve is a type of valve used to control the flow of fluid through a pipe or pipeline. It is named after the gate-like disc or wedge that moves up

...Gate Valve The Knife Gate Valve is a type of SS Gate Valve that is commonly used in various industrial applications. It is a specialized valve designed for handling slurry and other viscous fluids. This valve is a crucial component in controlling the flow of materials in pipelines and tanks. Size Range The Knife Gate Valve...

... (i.e. opening and closing parts, in which the opening and closing parts are called gate plates or gates, and the gate seats are called gate plate seats) to connect (fully open) or Cut off (fully close) the medium in the pipeline. It is not allowed to be

...Gate Valve DIN 3352 Flat Gate Valve GS C25 28 Inch DN700 PN100 Flat Gate Valve API 6D Parallel Slide Gate Valve Name: Flat Gate Valve Model: Gate Valve Size: 2"--40" Pressure: 150#-900# Product Material: Carbon & Lowalloy steel/STL/Nickel bare alloy Infomation: Flat gate valve widely used in oil, natural gas long-distance pipelines and gas fields Valves used in forging or casting body, the gate...